AUTOMATIC GATES DO IT YOURSELF HELP PAGES HOME BUSINESS OPPORTUNITIES SITE MAP CONTACT US WARRANTY INFORMATION ORDER FORM
Pick up at major branches or we deliver Australia wide.
Click for a quick quote

Slats

Click for a quote

GROUP5 GATES AND PANELS
WITH ALUMINIUM SLATS

Slant Slat

GROUP5 is a range of driveway gates and fence panels which is basically a main frame, followed by a supporting sub frame designed to allow the fixing of aluminium slats. Frames are normally made from aluminium but steel is an alternative if extra strength or weight is required.

SPECIFICATIONS

  • Sides and top rail 50x50mm SHS.
  • Bottom rail 100x50mm RHS.
  • Sub frame 25x25mm SHS.
  • Centre infill using customer chosen slats in powder coat or wood grain finish.
  • TRY THE SLANTED SLAT FOR THAT EXTRA PRIVACY

  • Unlike a standard slat the slanted slat which has a 65mm face the slanted slat face is 85mm
  • Adjust the gap to suit but a 10mm gap gives a slat appearance yet total privacy.
  • The slanted slat also about 25% heavier than a standard slat with greater wall thickness.
  • Slanted slats fit all standard gate and panel receivers and can be finished in any powder coat colours.
  •  

    Click on any photo for a larger version. Use arrows or mouse to cycle through.

    OTHER PAGES OF INTEREST
    Group1  Group2  Group3  Group4  Group6  Group7

    HOME  -  SITE MAP  -  QUOTES  -  WARRANTY -  DIY - CONTACT

    NSW| NT| QLD| SA| TAS| VIC| WA